Siemens
Siemens 6ES7151-3AA22-0AB0 PROFINET Interface Module Specification Sheet
Model: Siemens 6ES7151-3AA22-0AB0 PROFINET Interface Module Specification Sheet
Data Category Specific Par…
- Genuine products, direct from the factory
- Technical selection and commissioning support
- Bulk purchasing and customization available
Specifications & Service
| MOQ | 1 PCS |
|---|---|
| Warranty | 1 year |
| Delivery Time | 3-5 days |
| Shipping | FedEx/DHL/UPS/TNT |
| Payment | TT/Western Union |
Product Details
| Data Category | Specific Parameters |
|---|---|
| Product Model | 6ES7151-3AA22-0AB0 |
| Brand | Siemens |
| Product Type | PROFINET Interface Module (IM) |
| Product Series | SIMATIC DP (for ET 200S) |
| Module Designation | IM 151-3 PN ST |
| Number of PROFINET Interfaces | 1 |
| Max Transmission Rate | 100 Mbit/s |
| RJ45 Ports Quantity | 2 (incl. termination module) |
| Supported Protocols | PROFINET IO, SNMP, LLDP, ping, ARP (TCP/IP not supported) |
| PROFINET IO Services | IRT, Prioritized startup, Shared device |
| Max IO Controllers (Shared Device) | 2 |
| Redundancy Mode | Media Redundancy Protocol (MRP) supported |
| Connectable Modules | Max. 63 power/electronic/motor starter modules (up to 2 m width) |
| Address Area | Inputs: 256 byte; Outputs: 256 byte |
| Supply Voltage Buffering | 20 ms stored energy time (mains/voltage failure) |
| Max Input Current (1L+) | 200 mA |
| Typical Power Loss | 3.3 W |
| Isolation | 500 V tested (isolation between Ethernet and electronics; no isolation between backplane bus/supply voltage and electronics) |
| Diagnostic LEDs | BF (red, bus fault), SF (red, group error), 24V supply ON (green), network LINK (green) |
| Operating Ambient Temperature | 0…60 °C |
| Dimensions (W×H×D) | 60 mm × 119.5 mm × 75 mm |
| Approx. Weight | 150 g |
| Certifications | CE, UL approved |
| Configuration Control | Supported via dataset |
| PROFINET Features | Autocrossing, automatic transmission rate detection |
| Potential Separation | Yes (between Ethernet and electronics) |
