HLP-SP100 HOLIP Frequency converter

project
Specification
Input power
Voltage
Three-phase 380-480V ??15%
frequency
48-62Hz;
Maximum imbalance
3%;
Output power
The output voltage
Three-phase 0-100% input voltage;
Output frequency
V/F: 0-400Hz, VVC+: 0-200Hz;
Main control functions
control method
V/F, VVC+;
Starting torque
0.5Hz 120%;
Overload capacity
120% rated current (60s);
PWM carrier frequency
2K-16KHz; (Random PWM)
Speed setting resolution
Digital: 0.001Hz, Analog: 0.5?? of the maximum operating frequency;
Open loop speed control accuracy
30 ?C 4000 rpm: error ??8 rpm;
Control command source
LCP operator, digital terminal, local bus;
Set frequency source
LCP operator, analog quantity, local bus;
Acceleration and deceleration time
4 groups of acceleration and deceleration time 0.05-3600.00s;
Protective function
Power supply phase loss protection, undervoltage protection, overvoltage protection, overcurrent protection, overload protection, output phase loss protection, output short circuit protection, output grounding protection, overheating protection, signal disconnection, AMA failure, CPU failure, EEPROM failure, button Disabled, copying is invalid, LCP data is invalid, LCP data is incompatible, parameters are read-only, values are out of range, cannot be executed during operation, password input is incorrect, etc.
environment
Protection level
IP20
operating temperature
-10??~50??; above 40??, derating is required;
Operating humidity
5%-85% (no condensation at 95%);
vibration
1.14g
maximum altitude
1000m, derating is required for use above 1000m;